* Pneumatic Solenoid Valve Type: 2 Port 2 Position Normally closed type Valve
* Voltage: DC12V
* High-Quality Valve body is made of brass material, with long-serving life, diaphragm seal, and sensitive movement, the high-quality brass valve body would hold a press up to 711 PSI.
*This is a normally close type of electric solenoid valve, power on to open it and power off to close it. The coil protection level is IP65.
*Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, the solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80℃), which is fully complied with the national standard: JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn.
*Wide Range of Uses: This brass electric solenoid valve easily replaces broken valves, suitable for use with pipelines in Water, Oil, and air.
*ALL standard valves are supplied with Continuous Duty Coils of the proper class of insulation for the service indicated on the valve. It is normal for the coil temperature may become hot after being energized for extended periods. Smoke or burning indicates excessive coil temperature and the power should be disconnected from the coil immediately.