Aluminum Internal Pilot Solenoid Valve (2 Way / 2 Position) N/C, NPT 1/4" (2V025-08)
CAD $17.50 - CAD $24.50
Description:
* The Internal Pilot Solenoid Valve Type: 2 Port 2 Position Normally closed type;
* Voltage: DC12V / DC24V / AC24V 50/60Hz / AC110V 50/60Hz / AC220V 50/60Hz .
*The valve body is made of aluminum alloy and has strong pressure resistance. The inner hole is machined by a special process, with low frictional resistance, low starting air pressure, and long service life.
*The Internal Pilot Solenoid Valve Has Guide head made of excellent conductor material with high strength and high-frequency response for smoother operation.
*The Internal Pilot Solenoid Valve coil is easy to disassemble, Removable core nut, coil damage can be replaced at any time.
*The Internal Pilot Solenoid Valve stays close when the coil is D energized- and it opens when energized.
*Single Control Valve Used for controlling pilots or diaphragms of larger valves or small cylinders or any pressure system that is alternatively pressurized and exhausted.
Dimensions
Specification
| Model | 2V025-08 |
|---|---|
| Working Medium | Air, Water, Oil |
| Operation | Direct |
| Type | Normal Close |
| Orifice | 2.5 mm |
| CV Value | 0.23 |
| Port Size | 1/4″ |
| Operation Fluid Viscosity | Below 20 CST |
| Working-pressure | 7.25～100 PSI |
| Max. Test Pressure | 140 PSI |
| Max. Ambient Temperature | -10～80 ℃ |
| Operating Voltage Tolerance | ± 10% |
| Protect Class | IP 65 |
| Power Consumption | AC: 6.5 VA DC: 6.5 W |
| Insulation | F Class |
| Material of Body | Aluminum |
| Material of Oil Seal | NBR / VITON |
| Response Time | 0.05 Sec. |
Additional information
| Weight | 0.145 kg |
|---|---|
| Dimensions | 3.25 × 2.5 × 1 in |
| Voltage | AC110 50Hz/60Hz, AC220 50Hz/60Hz, AC24 50Hz/60Hz, DC12, DC24 |
| Oil Seal Material | NBR, VITON |
4 reviews for Aluminum Internal Pilot Solenoid Valve (2 Way / 2 Position) N/C, NPT 1/4" (2V025-08)
You must be logged in to post a review.
Related Products
(4 Previews)
Simon –
I bought this solenoid to control flow from my air compressor to my laser engraver. It took all of a couple of minutes to wire it up to the system and it works flawlessly.
(4 Previews)
Jackob –
I bought 18 pics for my aquarium project , looking to get more corporates with HAK PNEUMATIC in the future .
(4 Previews)
Happy –
They helped me to install the wiring diagram and I asked them to include an installation explanation.
(4 Previews)
Amazon Customer –
buy it from amazon , they are multi channel seller , nice job !