HAK Pneumatic Lubricator 1/4" NPT (Inlets/Outlets), 5-125 PSI, Air Prep Components 25 μ (AL2000-02 / AL3000-02).

Dimensions

Edit

Model	Flow Rate CFM	Port	A (mm)	B (mm)	C (mm)	D (mm)	Bracket	Weightkg (LB)
AL2000-02	18	1/4"	122	38	40	40	B240	0.22 (0.48)
AL3000-02	70	1/4"	142	38	53	53	B340	0.3 (0.66)

---

Description

* A lubricator adds controlled quantities of tool oil into a compressed air system to reduce the friction of moving components. Most air tools, cylinders, valves, air motors, and other air-driven equipment require lubrication to extend their useful life.* The use of an airline lubricator solves the problems of too much or too little lubrication that arise with conventional lubrication methods such as a grease gun or oil. Airline lubricators also supply the right kind of lubricant for the tools used.* Once the lubricator is adjusted, an accurately metered quantity of lubricant is supplied to the air-operated equipment. The only maintenance required is a periodic refill of the lubricator reservoir.* Adding lubrication to a system also “washes away” compressor oils that travel through the system in vapor form. Mineral oils added to the system prevent synthetic compressor oil build-up on system components. When lubricators are not used in a system, a coalescing filter should be installed to remove compressor oil aerosols.

---

Specification

Edit

Model Series	AL2000-02	AL3000-02
Port Size	1/4" NPT	1/4" NPT
Max. Operating Pressure	150PSI(9.9 kgf/cm^2)	150PSI(9.9 kgf/cm^2)
Operating Temperature	40 - 140°F(5 - 60°C)	40 - 140°F(5 - 60°C)
Bowl Material	Polycarbonate (Standard)	Polycarbonate (Standard)
Bowl Guard	Steel Bowl Guard	Steel Bowl Guard
Body Material	Die-Casting Aluminium	Die-Casting Aluminium
Seals	NBR	NBR
Service	For Air Only	For Air Only
Recommended Lubricant	ISO VG 32 or Same Grade Oil	ISO VG 32 or Same Grade Oil