HAK Pneumatic Brass Electric Solenoid Valve (2way / 2 Position) Normally Close, 1/2" NPT (2W160-15)
Regular price
$44.79
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
Description:
- HIGH QUALITY Valve body is made of brass material, with long-serving life, diaphragm seal, sensitive movement, the high-quality brass valve body would hold a press up MAX 7 KG/cm2.
- WIDE RANGE O
- F USES Suitable for use with swimming pool heater, furnace humidifier, water pressure booster pump, WIFI water valve, and WIFI smoke detector. In addition used with pipelines in Water, Air, and Gas valve, in low viscosity non-corrosive fluid applications.
- PRECAUTIONS FOR USE Better for intermittent short-time work, single continuous power on time is better to be less than 30 minutes, which will extend the valve’s life.
- NORMALLY CLOSED This is a normally close type electric solenoid valve, power on to open it and power off to close it. The coil protection level is IP65, and the power connection mode is lead-out type and junction box type.
- 100% CUSTOMER SATISFACTION GUARANTEED If you are not satisfied, we're not satisfied. That's why H.A.K Pneumatic offers you your money back on any blue air pneumatic purchases.
2W Drawing Instructions

Specification
Model | 2W160-15 |
---|---|
Working Medium | Air, Water, Oil, Gas |
Operation | Direct |
Type | Normal Close |
Orifice | 2.5 mm |
CV Value | 4.8 |
Port Size | 1/2″ |
Operation Fluid Viscosity | Below 20 CST |
Working-pressure | Air 0~100 PSI / Water 0~72 PSI / GAS 0~72 PSI |
Max. Test Pressure | 140 PSI |
Max. Ambient Temperature | -10~ 80℃ |
Operating Voltage Tolerance | ± 10% |
Material of Body | 2W: Brass |
Material of Oil Seal | NBR |