HAK Pneumatic Lubricator 1/2" NPT (Inlets/Outlets), 5-125 PSI, Air Prep Components 25 μ (AL4000-04).
|Model||Flow Rate CFM||Port||A (mm)||B (mm)||C (mm)||D (mm)||Bracket||Weight kg (LB)
|AL4000-04||140||1/2" NPT||177||41||70||70||B440||0.56 (1.23)|
* A lubricator adds controlled quantities of tool oil into a compressed air system to reduce the friction of moving components. Most air tools, cylinders, valves, air motors, and other air-driven equipment require lubrication to extend their useful life.
* The use of an airline lubricator solves the problems of too much or too little lubrication that arise with conventional lubrication methods such as a grease gun or oil. Airline lubricators also supply the right kind of lubricant for the tools used.
* Once the lubricator is adjusted, an accurately metered quantity of lubricant is supplied to the air-operated equipment. The only maintenance required is a periodic refill of the lubricator reservoir.
* Adding lubrication to a system also “washes away” compressor oils that travel through the system in vapor form. Mineral oils added to the system prevent synthetic compressor oil build-up on system components. When lubricators are not used in a system, a coalescing filter should be installed to remove compressor oil aerosols.
|Port Size||1/2" NPT|
|Max. Operating Pressure||150PSI
|Operating Temperature||40 - 140°F
(5 - 60°C)
|Bowl Material||Polycarbonate (Standard)
|Bowl Guard||Steel Bowl Guard
|Body Material||Die-Casting Aluminium
|Service||For Air Only
|Recommended Lubricant||ISO VG 32 or Same Grade Oil