HAK Pneumatic Brass Electric Solenoid Valve (2way / 2 Position) Normally Close, 1/2" NPT (2W160-15)
CAD $44.79 - CAD $58.22
Description:
- HIGH QUALITY Valve body is made of brass material, with long-serving life, diaphragm seal, sensitive movement, the high-quality brass valve body would hold a press up MAX 7 KG/cm2.
- WIDE RANGE O
- F USES Suitable for use with swimming pool heater, furnace humidifier, water pressure booster pump, WIFI water valve, and WIFI smoke detector. In addition used with pipelines in Water, Air, and Gas valve, in low viscosity non-corrosive fluid applications.
- PRECAUTIONS FOR USE Better for intermittent short-time work, single continuous power on time is better to be less than 30 minutes, which will extend the valve’s life.
- NORMALLY CLOSED This is a normally close type electric solenoid valve, power on to open it and power off to close it. The coil protection level is IP65, and the power connection mode is lead-out type and junction box type.
- 100% CUSTOMER SATISFACTION GUARANTEED If you are not satisfied, we're not satisfied. That's why H.A.K Pneumatic offers you your money back on any blue air pneumatic purchases.
2W Drawing Instructions
Specification
| Model | 2W160-15 |
|---|---|
| Working Medium | Air, Water, Oil, Gas |
| Operation | Direct |
| Type | Normal Close |
| Orifice | 2.5 mm |
| CV Value | 4.8 |
| Port Size | 1/2″ |
| Operation Fluid Viscosity | Below 20 CST |
| Working-pressure | Air 0～100 PSI / Water 0～72 PSI / GAS 0～72 PSI |
| Max. Test Pressure | 140 PSI |
| Max. Ambient Temperature | -10～ 80℃ |
| Operating Voltage Tolerance | ± 10% |
| Material of Body | 2W: Brass |
| Material of Oil Seal | NBR |
Additional information
| Weight | 0.753 kg |
|---|---|
| Dimensions | 5 × 3.25 × 2.5 in |
| Voltage | AC110 50Hz/60Hz, AC220 50Hz/60Hz, AC24 50Hz/60Hz, DC12, DC24 |
| Oil Seal Material | NBR, VITON |
5 reviews for HAK Pneumatic Brass Electric Solenoid Valve (2way / 2 Position) Normally Close, 1/2" NPT (2W160-15)
You must be logged in to post a review.
Related Products
(5 Previews)
Carlos –
Used in a water line in an on / off cycle to help reduce the total demand on a well water supply. Only been in use for a few weeks but it seems to be working well.
Recommended !
(5 Previews)
kARRY –
Worked perfect and way cheaper than part from a dealer
(5 Previews)
Quebec Customer –
Use it for my swimming pool , worked nice , make sure to get all the fittings and the PTFE (installation paper include too)
(5 Previews)
V W –
Strong brass , high quality NPT THERAD , tried many times before final installation, finally honest seller !
(5 Previews)
Pneumati Solenoid VALVE –
Normally closed / 24DC / 1/2″ NPT very high quality solenoid valve , used for my compressor !
Also you can ask for 110v/ 12DC IT’S AVAILABLE !